Garfitts Catalogue 2018 - to jump to a page type it in the field to the right and press

Parts are not original. OEM part numbers for reference purpose only. Measurements are only approximations. Tel: (0044) 0114 251 3344 Fax: (0044) 0114 251 3000 www.garfitts.com sales@garfitts.com 166 Key GARFITTS O.E.M. Req. Price No. Part No. Part No. Description Qty. £ (ea) Other Parts Available 13 G3296-15 GAR Only Locknut 1 14 G170714 GAR Only Pressure Relief Fitting 2 19 G150671 GAR Only 13/16" Spacer, Repairable Grooved Roller A/R 19 G150676 GAR Only 1 1/4" H.D. Spacer, Rep. Grooved Roller A/R 20 G150673 GAR Only Washer, Repairable Grooved Roller A/R 21 G150675 GAR Only Threaded Roller End, 3" 2 22 G150684 GAR Only Threaded Tube, Fits G601243R 1 23 G150691 GAR Only Nyloc Set Screw, 3/8-16 x 3/8" 4 24 G302-5 M0004 Grease Zerk 2 25 G3220-7 F7005 Jam Nut 2 27 G700502 GAR Only Grease Retainer 2 28 G328062 GAR Only Seal, Roller 2 29 G700501 GAR Only Regreaseable Roller End, Hardened 2 30 G412063 GAR Only Screw, Sq. Hd. Set 2 31 G254-78 B4512 Cone, Bearing 2 33 GA601079 A601079 Shaft Assy., with Inner Sleeve 3/4" Dia. 1 34 GE1028 E1028 Inner Seal 2 35 G253-111 E1029 Outer Seal 2 36 GL4004 L4004 Wear Sleeve 2 37 GF7011 F7011 Hex Nut 2 38 G150674 GAR Only Wear Sleeve 2 39 G1123 M-01-W-1123 Sleeved Roller Tube with Ends 1 40 G1022 M-01-D-1022 Rear Roller Shaft, 7/8" Ends 1 41 GC-10024 C-10024 Oil Seal 2 42 GC-10025 C-10025 Retaining Ring 2 43 GC-10209 C-10209 Bearing 2 44 G1184 M-01-D-1184 PVC Sleeve 2 51 G253-117 GAR Only Outer Seal 2 52 G600501 Bushing, Slotted 2 53 G254-79 B4015 Cup, Bearing 2 54 G601077 601077 Tube Assy., 3" Roller 1 55 G253-122 GAR Only Inner Seal 2 56 G600105 GAR Only Shaft, Roller, 3/4" Dia. 1 Replacement Brouwer 3/5/7 Gang Mower Parts Reel, Bed Knife & Roller When a cutting cylinder is sharp and correctly adjusted against itʼs bottom blade it will cut evenly and leave the tops of the grass with clean straight edges. A cylinder will not stay sharp for long and regular re-grinding is needed to continue the scissor like cutting action. Grinding leaves rough edges on the cylinder which need to be honed away using the back lapping process. The procedure is very simple and gives the cylinder the cutting action required. Lapping Paste Expert quality pre-mixed lapping paste made from high grade Silicon Grit. 2kg Tubs 12kg Tubs 4.5kg Tubs GARF CATALOGUE '11 - Pg 149 - 368 :GAR CATALOGUE '11 - Pg 149 - 368 29/11/10 10:33 Page 166